Strong Thrust In-roll Electromagnetic Stirrer(EMS)
You are here: Home » Products » Electromagnetic Stirrer » Strong Thrust In-roll Electromagnetic Stirrer(EMS)

loading

Share to:
sharethis sharing button

Strong Thrust In-roll Electromagnetic Stirrer(EMS)

The in-roll electromagnetic stirrer is installed on the segment of the continuous casting machine, replacing free supporting roller, without affecting the structure of the existing continuous casting machine.
The installation dimensions are exactly the same as that of the ordinary roller, and can be exchanged.
The position is easy to be adjusted;
Availability:
Quantity:
  • DJST

  • Zhongke

  • 8479820000

The in-roll electromagnetic stirrer with high thrust force for the secondary cooling zone of slab has passed the

scientific and technological achievements appraisal of China Metal Society, as the technology of it is advanced.

The product has been applied on more than one hundred strand of continuous casting line for slab, and its

market share in China is over 90%;

Features:

It is easy to install. The in-roll electromagnetic stirrer is installed on the segment of the continuous casting

machine, replacing free supporting roller, without affecting the structure of the existing continuous casting

machine. The installation dimensions are exactly the same as that of the ordinary roller, and can be exchanged.

The position is easy to be adjusted;


lt adopts special magnetism shielding technology, non-cogging structure technology, numerical simulation

optimization of winding and iron core structure technology, the electromagnetic force is above twice that of

similar products (patented invention);


The roller sleeve is made of non-magnetic, high-Cr-Ni heat-resistant stainless steel, which has excellent wear

resistance and heat resistance; And its reasonable water circuit design provides high cooling efficiency;


The auxiliary supporting structure is adopted to be applied on continuous caster with plate width of 1800 mm to

2600 mm; and the splitting design is adopted, so as to make it applied on continuous caster with plate width of

2600 mm or more.


Technical parameters of In-roll EMS
ItemTechnical   parameters
ModelDJST
Cooling   methodDirect   water cooling
Rated   current500A
Voltage400V
Apparent   power500KVA
Active   power200KW
Center   magnetic induction force600GS   (distance of 250mm)
Grounding   insulationBefore   filled with water ≥500   MΩ
    24 hours after filled with water and pressurized  ≥200 MΩ
Cooling   water flow12m³/h for single roller
Cooling   water pressure0.3--0.4MPa
Dimension1900   * Φ240
Weightapproximately   850 kg /single roller(subject to the actual weight)


Previous: 
Next: 

Product Category

 
Zhongke Electric is committed to R&D and providing complete solution for electromagnetic metallurgy, as well as on-line heating system for continuous rolling.

Navigation

Product Category

Contact Us

  Contact Person: Eric Wang
  Tel: +86-730-8688890
  Phone: +86-15173020676
  E-mail: wangfp@cseco.cn
 Copyrights 2021 Hunan Zhongke Electric Co., Ltd. All rights reserved. Supported by Leadong.