Optimum Design Metallurgical Equipment In-roll Electromagnetic Stirrer for Continuous Casting in Steel Making
You are here: Home » Products » Electromagnetic Stirrer » Optimum Design Metallurgical Equipment In-roll Electromagnetic Stirrer for Continuous Casting in Steel Making
Share to:

Optimum Design Metallurgical Equipment In-roll Electromagnetic Stirrer for Continuous Casting in Steel Making

EMS can be applied in continuous casting, achieving the effect of improving steel quality. Coils are made of high quality sintered wire, which are characterized by high resistance to flushing, water and high temperature; Three--dimensional analysis software of modern computer is adopted to process optimum design on the distribution space of electromagnetic field inside the mould, so as to make the distribution of electromagnetic field of EMS be more reasonable and the generated magnetic field force be more efficient;
Availability:
Quantity:
  • DJST
  • Zhongke
  • 8479820090

Applications

EMS can be applied in continuous casting, achieving the effect of improving steel quality.


Features

1. Long service life.

Coils are made of high quality sintered wire, which are characterized by high resistance to flushing, water and high temperature;

2. High efficiency of magnetic field stirring.

Three--dimensional analysis software of modern computer is adopted to process optimum design on the distribution space of electromagnetic field inside the mould, so as to make the distribution of electromagnetic field of EMS be more reasonable and the generated magnetic field force be more efficient;

3. Excellent metallurgical effect

Under the premise of meeting the requirement of the EMS installation, the stirring scope of EMS is designed to be increased as far as possible. It can not only increase the effective working height of magnetic field in the EMS, make magnetic field distribution more homogeneous,  but also improve the molten steel stirring force and extend the stirring time, creating conditions for further improving the casting speed and increasing output;

4. Low consumption

High quality silicon steel is adopted for the iron core, which increases the intensity of magnetic field inside the EMS and improves the iron core saturation of EMS, at the same time decreases the consumption of EMS itself.


Technical parameters of In-roll EMS
ItemTechnical   parameters
ModelDJST
Cooling   methodDirect   water cooling
Rated   current500A
Voltage400V
Apparent   power500KVA
Active   power200KW
Center   magnetic induction force600GS   (distance of 250mm)
Grounding   insulationBefore   filled with water ≥500   MΩ
    24 hours after filled with water and pressurized  ≥200 MΩ
Cooling   water flow12m³/h for single roller
Cooling   water pressure0.3--0.4MPa
Dimension1900   * Φ240
Weightapproximately   850 kg /single roller(subject to the actual weight)


Previous: 
Next: 

Product Category

 
Zhongke Electric is committed to R&D and providing complete solution for electromagnetic metallurgy, as well as on-line heating system for continuous rolling.

Navigation

Product Category

Contact Us

  Contact Person: Eric Wang
  Tel: +86-730-8688890
  Phone: +86-15173020676
  E-mail: wangfp@cseco.cn
 Copyrights 2021 Hunan Zhongke Electric Co., Ltd. All rights reserved. Supported by Leadong.